Description

Wood chip size up to 50 GR (50 x 50 mm)
Drying capacity 120 kg / h, initial chip moisture 45% - final moisture 10%
The water temperature required by the heat exchanger fan is 80-90 ° C
Without outlet Ø600mm
Dimensions (length x width x height) 6.5 x 2.5 x 4.5 m
Optimal 4-layer continuous drying of wood chips
Dry chip removal screw
During the transition, the chips are screened and the fine fraction is separated. Fine Conveyor Screw: Ability to remove small particles from the base material separately or they can be added back
Control panel electrification and control
Remote maintenance module via computer and mobile phone, error messages via e-mail
Humidity sensors for automatic control of drying
Surface sensors with additional free connectors to control loading and unloading
For placement and removal of material at the customer's disposal - and this is not included in the offer. Depending on local conditions
we recommend a conveyor belt or a rising screw. Such conveyor systems can also be arranged as needed.
The filter system is provided by the customer and is not part of the offer. The exhaust air must be filtered. If filter equipment is already in place; it can be used whenever possible (e.g. equipped with an additional filter or cyclone.
Heat exchanger 1 circuit, heat consumption 120 kW and fan 4.0 kW with frequency converter