Description

It has a measuring amplifier for precise measurements and an OLED display.
The new Res-Cap mode combines the reliability of resistance measurement with the easy handling of the capacitive method. Over 300 different types of wood are automatically taken into account when measuring the resistance, the temperature measurement of which is manually compensated. Capacitive measurement allows fast, non-traceable measurements. The tree species setting includes a selection of more than 50 tree species. Limit values are set separately. When the set threshold value is exceeded, a flashing LED will appear as an LED warning signal.
Humidity based on electrical resistance: 5-70% (Atro)
Accessories for measuring wood moisture. Slide hammer Hammer hammer Tefl coated electrodes Insulated electrodes
Chip moisture measurement: tefl. coated probe with connector uncoated probe
Moisture content for capacitive charging: 5-50% (Atro)
– No need for separate electrodes or cables (capacitive charge measurement)
Convenient and fast air humidity meter for quick measurement of single or batches.
Wood moisture display directly on mass percent OLED display
Min, Max and Hold function
Recording of the last 5 measured values
When the device is not in use, the device automatically turns off
Wood temperature compensation is done manually or automatically via machine temperature
Visual LED alarm when limit value is exceeded
A “peak measurement” of over 300 wood-based electrical resistance measurements
More than 50 types of capacitive charge measurement
Case dimensions: 175 [W] x 50 [W] x 30 mm (H), weight about 200 gPower source: 9 V battery
Total length: about 185mm
Other accessories: Smaller bag Larger bag
Link: user manual in English, Ram-hamer ML 20, protected electrodes L= 40 mm / 25 mm, cable MK 8</ a